Sold Out

Yeti Link Expansion Module for Vehicle Integration - Battery Charging System - 98210



see the tab below for more info.

*Click HERE for additional installation services information

  Yeti Link Expansion Module

  • Simple installation - remove a few small screws and a blank coverplate in your Goal Zero 1000X, 1500X etc and plug in the Yeti Link Expansion Module. 
  • Quickly and easily recharge a Yeti Lithium (1000X, 1500x, 3000X or higher) from your vehicle while on the move. Charge rates vary from 25A - 80A Max Current (300W -750W) depending on Yeti Lithium size and capacity.
  • When placed in “Vehicle Mode,” the Yeti Link allows your Yeti Lithium to safely pull power from your vehicle’s alternator while the vehicle is running and stop pulling power when the vehicle is off.  Automatically monitor's your vehicle's status (running or off) to eliminate the possibility of draining your starting battery while the vehicle is off.
  • NOTE: Yeti Link must be in Vehicle Mode to utilize this feature or it will drain your vehicle’s battery. All Links come standard set in “Tank Mode". Not compatible with Yeti 1000 V1 (38004).

Combine the Expansion module with the Goal Zero EC8 12ft cable 98206 (sold separately) to complete the "vehicle integration kit" which essentially creates a "dual battery system" with your Goal Zero Portable Battery. Connects only to your vehicle's starting battery's terminals, eliminating complicated splicing or connection into the vehicle's wiring. Fuse protected, and large gauge wiring for safety and maximum performance. Simply run the cable from your vehicle's battery to the location of your Goal Zero Yeti Power Station, and turn the module into "vehicle mode".


Max Input from Yeti Tank to:

  • Yeti 1000X: 454-605W
  • Yeti 1400/1500X: 454-750W
  • Yeti 3000/3000X: 750W
  • Yeti 6000X: 750W


  • Product SKU: 98210
  • Weight: 1.5 lbs (680 g)
  • Dimensions: 10.25 x 3.3 x 1.5 in. (26 x 8.4 x 3.8 cm)
  • Warranty: 2 Years
  • YETI X 120W Power Supply
  • Gauge: 16AWG
  • Cable Length: 9 ft 4 in.
  • Dimensions: 2.5 x 5.9 x 1.4 in. (6.5 x 15 x 3.5 cm)


  • Do not exceed 22V input
  • 8mm Charging Port (input): 14 - 22V Do not exceed 150W (10A) per port
  • External Battery Connector (output): 65A Charge Controller
  • External Battery Connector (Input/Output): 10.7-15V. Do not exceed 15V
  • YETI X 120W Power Supply
  • Input: AC Wall Plug 100-240V - 50/60Hz 3.0A
  • Output: 8.0mm 16V- 7.5A, 120W


  • Yeti Link Expansion Module
  • 120W Power Supply


  • NOTE: While most vehicles manage their battery in nearly identical ways, it has become increasingly common for cars to have slight variations in the way they charge their internal battery system. If you are experiencing slower charging speeds this is due to the integration of smart alternators, which are designed to improve the efficiency of the vehicle and reduce strain on the motor in an idle state. As can be imagined, every manufacturer does this differently. Due to these variances, some of our customers may experience slow charge rates with their Yeti Link when used with a vehicle in a smart alternator configuration. Goal Zero is actively working on a firmware update to address the main concerns regarding the Yeti Link with smart alternator integrations.
Once your order is placed you will receive a confirmation email with your order details. This is NOT a confirmation that your order is ready for immediate pickup. You will receive a second email when your order is prepared and ready for pickup at our store.

To take advantage of in-store pickup, simply choose the in-store pickup option available during the checkout process. Below is a step by step guide:
  1. From the cart page be sure that 'Package Protection' is turned off (slider button turns from light blue to grey). Then click "PROCEED TO CHECKOUT".
  2. After entering your email address, under the Delivery method section select 'Pick up', then 'Continue to payment'.
  3. Verify that your delivery method says Pick up in store at our Wheat Ridge, CO location and enter your payment info.
Step-by-step instructions for checking out using Local Pick up at Altitude Industries in Wheat Ridge, CO
For all of our store policies please see HERE.
Have Questions?Contact us.
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Yeti Link Expansion Module for Vehicle Integration - Battery Charging System - 98210
Check your inbox for the discount code!