Sale
Leitner Designs Flathead M10 x 25 BOLTS 8pcs with thread lock
$49.99
$29.99
IN-STORE PICKUP is AVAILABLE FOR MOST ITEMS
see the tab below for more info.
Made by Leitner Designs.
Used in their active cargo system to bolt the uprights to the rails.
Once your order is placed you will receive a confirmation email with your order details. This is NOT a confirmation that your order is ready for immediate pickup. You will receive a second email when your order is prepared and ready for pickup at our store.
To take advantage of in-store pickup, simply choose the in-store pickup option available during the checkout process. Below is a step by step guide:
To take advantage of in-store pickup, simply choose the in-store pickup option available during the checkout process. Below is a step by step guide:
- From the cart page be sure that 'Package Protection' is turned off (slider button turns from light blue to grey). Then click "PROCEED TO CHECKOUT".
- After entering your email address, under the Delivery method section select 'Pick up', then 'Continue to payment'.
- Verify that your delivery method says Pick up in store at our Wheat Ridge, CO location and enter your payment info.
For all of our store policies please see HERE.
Have Questions?Contact us.
Front Runner Slats Load Bars (VARIOUS SIZES)
*Click HERE for additional installation services information Create a custom load bar setup with the Front Runner Load Bars. Be sure to add the Front Runner Load Bar End Caps click here. Consisting of: 1 x Standard Slat / Load Bar End...
from $80.95
Sale
Rack Foot Pair - Low Profile Heavy Duty Stainless Steel - Universal Mounting Legs
*Click HERE for additional installation services information Made by Quick Pitch of South Africa 100% Stainless Steel - Super heavy duty thick - 1/8" thick wall. Bombroof and cost effective! LOW PROFILE! Nearly universal fit. Just about any rack can be mounted...
$75.00
$49.99
RHINO RACK VORTEX BARS (Various Sizes)
*Click HERE for additional installation services information The Rhino-Rack Vortex bars can be purchased in black and is cut to 7 different predefined lengths 42", 46", 54", 59", 65", 71" to suit different vehicles. Aero style bars that are quiet and cut...
from $108.99
Sale
Sold Out
Sold Out
Leitner Designs T-BOLT KIT 4pcs
Made by Leitner Designs but useful in a wide variety of applications with slotted tracks Bolt: M8 thread, 20x20mm square head, 25mm threaded length (4pcs) Nut: M8 thread, nylon lock, wide flange (4pcs) PART # 00-BKA-00-1099 Designed to Fit ACS...
$12.00
$9.99
Sale
Sold Out
Sold Out
Leitner Designs FORGED ACS - Misc Set of T-Slot Channel Nuts Set of 8
Set of eight M8 small t-nuts for Leitner Designs load bar and extrusion slots. Can be used to assemble the rack per the instructions, or can be used to slide into the various t-slots of the rack in order to...
$49.99
$39.99
Sale
Sold Out
Sold Out
Leitner Designs LEITNER DESIGNS Gear Pod KEYS
Note: New item but open box. Unused. Will not be shipped in original Leitner packaging. Includes: two replacement keys We believe all leitner gear pods are keyed alike, but the key number is on the key. "RS001" LEITNER FORGED ACS...
$9.99
$4.99
Sale
Leitner Designs Hex Black Button Head M6x20mm Bolts 4pcs
Made by Leitner Designs but useful in a wide variety of applications. Mount Leitner Accessories Bolt: M6 thread, with pre-applied thread locker, 2 threaded length (4pcs) Easy install – uses hex Allen key Meets factory specifications– Will not rust or corrode...
$59.99
$24.99
Sale
Leitner Designs Hex Black Button Head M6x12mm Bolts 4pcs
Made by Leitner Designs but useful in a wide variety of applications. Mount Leitner Accessories Bolt: M6 thread, with pre-applied thread locker, 2 threaded length (4pcs) Easy install – uses hex Allen key Meets factory specifications– Will not rust or corrode...
$59.99
$19.99
Sale
Leitner Designs Classic ACS Rack M8x60 flanged Grade 8 Bolts 3pcs
Made by Leitner Designs but useful in a wide variety of applications. This specific bolt holds the upright braces to the rear uprights in an ACS classic rack Bolt: M8 thread, zinc coated, 60mm length, hex with flanged head (3pcs)...
$59.99
$29.99
Sale
Leitner Designs ACS Rooftop Tent Brackets (set of two brackets & hardware)
Set of TWO brackets (half of a typical full set of 4 brackets) which is useful if you are adding a middle (3rd crossbar) Two black L brackets 4 T-bolts for Leitner crossbar slots 6 M8 lock nuts 2 M8x20...
$75.00
$35.00
Sale
Leitner Designs Hex Black Button Head M8x14mm Bolts 6pcs
Made by Leitner Designs but useful in a wide variety of applications. Mount Leitner Accessories Bolt: M8 thread, with pre-applied thread locker, 14mm threaded length (6pcs) Easy install – uses hex Allen key Meets factory specifications– Will not rust or corrode...
$59.99
$29.99
Sale
Leitner Designs LEITNER DESIGNS Kit - Hardware for Pace Edwards Ultragroove Tonneau Cover
$59.99
$14.99
Leitner Designs LEITNER DESIGNS Kit - Hardware for Pace Edwards Ultragroove Tonneau Cover
Note: New item but open box. Unused. Will not be shipped in original Leitner packaging.
Kit made by Leitner Designs includes:
6pcs stainless 5/16 thread Carriage Bolt
6pcs black 5/16 lock nut
6 pcs black 5/16 washer
see instructions HERE
$59.99
$14.99
Sale
Leitner Designs T-40 Torx Button Head M8 x 20mm Bolts 4pcs
Made by Leitner Designs but useful in a wide variety of applications with slotted tracks Bolt: M8 thread, 20x20mm square head, 25mm threaded length (4pcs) Nut: M8 thread, blue locktite on thread, integrated washer (4pcs) Easy install – uses T-40 Torx...
$59.99
$29.99
Leitner Designs LEITNER DESIGNS Quick Release Hand Knobs - Set of 2
Note: New item but open box. Unused. Will not be shipped in original Leitner packaging. CONTAINS ONLY TWO HAND KNOBS (NOT FOUR) LEITNER FORGED ACS MANUAL HERE LEITNER CLASSIC ACS MANUAL HERE Lost or misplaced a rear load bar knob?...
$10.00
Sale
Quick Pitch Load Bar End Cap Pair
*Click HERE for additional installation services information
Quick Pitch South Africa Load Bar End Caps
1 pair = 2 caps for one load bar/crossbar
$19.95
$5.99
Sale
Rhino Rack Awning Angled Down Heavy Duty Mounting Bracket for Flush Bars 32127 - OPEN BOX
$117.00
$65.00
Rhino Rack Awning Angled Down Heavy Duty Mounting Bracket for Flush Bars 32127 - OPEN BOX
*Click HERE for additional installation services information OPEN BOX UNIT Mount just about anything, including almost any a variety of awnings including the rhino rack sunseeker series directly to Rhino Rack paltforms or crossbars, for a flush low mounting solution. HEAVY DUTY...
$117.00
$65.00
Front Runner Slats Add On Kit (VARIOUS SIZES)
*Click HERE for additional installation services information More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface. Transform your Slimline II Rack Tray into a semi-solid, or solid surface;...
from $80.95