Sale
Leitner Designs Classic ACS Rack M8x60 flanged Grade 8 Bolts 3pcs
$59.99
$29.99
IN-STORE PICKUP is AVAILABLE FOR MOST ITEMS
see the tab below for more info.
Made by Leitner Designs but useful in a wide variety of applications. This specific bolt holds the upright braces to the rear uprights in an ACS classic rack
Bolt: M8 thread, zinc coated, 60mm length, hex with flanged head (3pcs)
But: Flanged hex nut M8 nylon lock (3pcs)
Once your order is placed you will receive a confirmation email with your order details. This is NOT a confirmation that your order is ready for immediate pickup. You will receive a second email when your order is prepared and ready for pickup at our store.
To take advantage of in-store pickup, simply choose the in-store pickup option available during the checkout process. Below is a step by step guide:
To take advantage of in-store pickup, simply choose the in-store pickup option available during the checkout process. Below is a step by step guide:
- From the cart page be sure that 'Package Protection' is turned off (slider button turns from light blue to grey). Then click "PROCEED TO CHECKOUT".
- After entering your email address, under the Delivery method section select 'Pick up', then 'Continue to payment'.
- Verify that your delivery method says Pick up in store at our Wheat Ridge, CO location and enter your payment info.
For all of our store policies please see HERE.
Have Questions?Contact us.
Leitner Designs BOLT KIT-TRAKLOK Set of 4pcs PART # 00-BKAF-00-1346
PART # 00-BKAF-00-1346 In Stock Do you have an accessory made by another manufacturer? A bicycle, kayak, or locking surf rack? Want to fit it into our Active Cargo System truck bed rack? All you need in most situations is...
$12.00
Sale
Sold Out
Sold Out
Leitner Designs FORGED ACS - Misc Set of T-Slot Channel Nuts Set of 8
Set of eight M8 small t-nuts for Leitner Designs load bar and extrusion slots. Can be used to assemble the rack per the instructions, or can be used to slide into the various t-slots of the rack in order to...
$49.99
$39.99
Sale
Leitner Designs ACS Tie Down Rings
Our Active Cargo System tie-down ring allows you to attach a tie-down strap to almost any location on the ACS truck bed rack! Simple one-bolt installation. A must-have when carrying odd-sized cargo. Specifications: Active Cargo System Truck Bed Rack Tie-Down...
$30.00
$24.99
Sale
Sold Out
Sold Out
Leitner Designs LEITNER DESIGNS Gear Pod KEYS
Note: New item but open box. Unused. Will not be shipped in original Leitner packaging. Includes: two replacement keys We believe all leitner gear pods are keyed alike, but the key number is on the key. "RS001" LEITNER FORGED ACS...
$9.99
$4.99
Sale
Leitner Designs Hex Black Button Head M6x20mm Bolts 4pcs
Made by Leitner Designs but useful in a wide variety of applications. Mount Leitner Accessories Bolt: M6 thread, with pre-applied thread locker, 2 threaded length (4pcs) Easy install – uses hex Allen key Meets factory specifications– Will not rust or corrode...
$59.99
$24.99
Sale
Leitner Designs Hex Black Button Head M6x12mm Bolts 4pcs
Made by Leitner Designs but useful in a wide variety of applications. Mount Leitner Accessories Bolt: M6 thread, with pre-applied thread locker, 2 threaded length (4pcs) Easy install – uses hex Allen key Meets factory specifications– Will not rust or corrode...
$59.99
$19.99
Sale
Leitner Designs ACS Rooftop Tent Brackets (set of two brackets & hardware)
Set of TWO brackets (half of a typical full set of 4 brackets) which is useful if you are adding a middle (3rd crossbar) Two black L brackets 4 T-bolts for Leitner crossbar slots 6 M8 lock nuts 2 M8x20...
$75.00
$35.00
Sale
Leitner Designs Hex Black Button Head M8x14mm Bolts 6pcs
Made by Leitner Designs but useful in a wide variety of applications. Mount Leitner Accessories Bolt: M8 thread, with pre-applied thread locker, 14mm threaded length (6pcs) Easy install – uses hex Allen key Meets factory specifications– Will not rust or corrode...
$59.99
$29.99
Sale
Leitner Designs LEITNER DESIGNS Kit - Hardware for Pace Edwards Ultragroove Tonneau Cover
$59.99
$14.99
Leitner Designs LEITNER DESIGNS Kit - Hardware for Pace Edwards Ultragroove Tonneau Cover
Note: New item but open box. Unused. Will not be shipped in original Leitner packaging.
Kit made by Leitner Designs includes:
6pcs stainless 5/16 thread Carriage Bolt
6pcs black 5/16 lock nut
6 pcs black 5/16 washer
see instructions HERE
$59.99
$14.99
Sale
Leitner Designs T-40 Torx Button Head M8 x 20mm Bolts 4pcs
Made by Leitner Designs but useful in a wide variety of applications with slotted tracks Bolt: M8 thread, 20x20mm square head, 25mm threaded length (4pcs) Nut: M8 thread, blue locktite on thread, integrated washer (4pcs) Easy install – uses T-40 Torx...
$59.99
$29.99
Sale
Leitner Designs T-BOLT KIT 4pcs
Made by Leitner Designs but useful in a wide variety of applications with slotted tracks Bolt: M8 thread, 20x20mm square head, 25mm threaded length (4pcs) Nut: M8 thread, nylon lock, wide flange (4pcs) PART # 00-BKA-00-1099 Designed to Fit ACS...
$12.00
$9.99
Sale
Leitner Designs Flathead M10 x 25 BOLTS 8pcs with thread lock
Made by Leitner Designs.Used in their active cargo system to bolt the uprights to the rails.
LEITNER FORGED ACS MANUAL HERE
$49.99
$29.99
Sale
Leitner Designs LEITNER DESIGNS Load Bar End Caps
Note: New item but open box. Unused. Will not be shipped in original Leitner packaging. Includes: two end caps LEITNER FORGED ACS MANUAL HERE LEITNER CLASSIC ACS MANUAL HERE Lost an endcap off your ACS load bar? Replace them with...
$19.99
$9.99
Leitner Designs LEITNER DESIGNS Quick Release Hand Knobs - Set of 4
Note: New item but open box. Unused. Will not be shipped in original Leitner packaging. Includes: FOUR hand knobs LEITNER FORGED ACS MANUAL HERE LEITNER CLASSIC ACS MANUAL HERE Lost or misplaced a rear load bar knob? Replace them with...
$15.00